Cleaning
To clean your knife, rinse it with fresh water straight after use and dry it thoroughly before putting it away. Never put a SICUT knife in the dishwasher, and don’t leave wooden handles soaking in water.
Sharpening
A sharp knife is a safer knife, a dull blade needs more force to cut, which is when slips occur. Hone your blade regularly to maintain the edge between uses, and sharpen it properly once it starts to feel dull rather than waiting until it’s blunt.
_______________________
A general guide to follow for blade angle is as follows:
• Trade & Butchering Knives (boning, skinning, butcher knives): 20 to 25 degrees per side. This gives a durable edge that holds up to repeated use on bone and sinew.
• Filleting & Slicing Knives: 15 to 20 degrees per side. A finer edge cuts cleanly through soft flesh, though it won’t hold up to the same abuse as a wider angle.
• Hunting & General Fixed-Blade Knives: 20 to 25 degrees per side, prioritising durability in the field over razor sharpness.
• Cleavers & Heavy Duty Blades: 25 to 35 degrees per side, the wider angle protects the edge when chopping through bone.
• Folding & EDC Knives: 20 to 25 degrees per side, a middle ground between everyday cutting and edge retention.
Storage
Protect the cutting edge when your knife isn’t in use. If you leave it loose in a drawer, it will dull against other knives and cutlery. Your SICUT knife should be stored with its
edge protected in its sheath, a knife wrap or a dedicated block. Additionally, your knife should always be kept somewhere dry.
Maintenance
Use your knife only for the job it’s designed for. Cutting hard materials, prying with the blade or twisting it under load are the fastest ways to chip an edge or snap a tip, and that kind of damage isn’t a manufacturing fault, so it falls outside the warranty.
Frequently Asked Questions
No. Dishwashers damage handles and accelerate rust on the blade. Hand wash with fresh water and dry your knife straight away.
It depends on how often you use it. Hone regularly to maintain the edge and sharpen properly with a stone once it starts to feel dull rather than waiting until it struggles to cut.
It depends on the knife. As a general rule, trade and hunting knives sit around 20 to 25 degrees per side, filleting and slicing knives are finer at 15 to 20 degrees and cleavers sit wider at 25 to 35 degrees to protect the edge.
No. SICUT’s lifetime warranty covers defects in materials and workmanship under normal use. It doesn’t cover rust, corrosion or damage caused by improper cleaning, storage or lack of maintenance.
Your SICUT knife is backed by a lifetime warranty against defects in materials and workmanship under normal use. If a genuine manufacturing fault occurs, SICUT will repair or replace the knife at its discretion. It doesn’t cover normal wear and tear, misuse, damage from improper use or modification.